Additional Silikon Sealant Two Components Potting Silicone Rubber
|FOB Price:||Get Latest Price|
|Min. Order:||1 Ton|
|Payment Terms:||L/C, T/T, Western Union, cash|
- Model NO.: 6619
- Material: Silicone Rubber
- Form: Liquid Rubber
- Trademark: TBL
- Origin: Guangdong, China
- Raw Material: Silicone Rubber
- Appearance: Liquid
- Hardness (Shore a): 40-70
- Specification: 1: 1
Potting for inside of LED driver power supply
Low viscosity, good fluidity, good heat conductive and flame retardance.
Cured at room temperature or by heating
Excellent waterproof, moisureproof and insluating performance after cured
|Curing time /min@60ºC||30~60||--|
|Curing time /min@80ºC||10~40||--|
|Durometer (Shore A)||50~70||ASTM D2240|
|Thermal Conductivity /W·m-1k-1||0.6~0.8||ASTM D5470|
|Dielectric Strength /kV/mm||>20||ASTM D149|
|Volume Resistivity /Ω·cm||>10 14||ASTM D257|
|Flame Retardant Rating||V-0||UL 794|
How to Use it
Weighing: mix A & B components separately, weigh A & B components as per weight ratio 1:1 exactly.
Mixing: put B component to A component, mix evenly, it can be finished by hand or equipment.
Defoaming: defoamed in the vacuum condition.
Potting: clean the surface that needed to be coated, put the rubber into the mould.
Curing: curing at room temperature or by heating. In room temperature, the viscosity of rubber will increased along with time extension, it would double with 40-60 minutes.
1. Sample: Sample is free for our valuable customer.
2. OEM: OEM service is provided for our valuable customer.
3. Welcome to visit our factory anytime.
4. Welcome to be our brand "TBL" distributor in your local place.
Our Exhibition News